10 Inch Trommel - Water Motor Drive
KT10WD$2,295.00
Product Details
We
are excited to present our New KT10 Trommel. The KT10 Trommel is ideal
for harsh conditions such as high clay content, heavily rooted material
and compacted gravels. The material is fed and washed in the feed hopper
that flows into the classifier drum. The drum, with the spray bars and
breaker bars, thoroughly washes and classifies the material creating
ideal conditions for optimum fine gold recovery in any sluice. The
KT10 is capable of moving serious amounts of material of up to one yard
per
hour, keeping a one or two man crew busy.
The feed
hopper, belly pan and drum end caps are constructed out of a bulletproof
Polyethylene Cross link plastic incorporating designs you can only get
out of a mold. We put a lot of thought and testing before we built these
molds and everything works flawlessly. We fabricated the Drum out of a
aluminum punch plate with replaceable drums with a variety of sizes (such
as 3/8” ¼” and ½”) for different applications. We have unique flipper
bars that can be modified and even removed for different materials. The 5
adjustable articulating legs allow the machine to be set up in the most
adverse conditions in just a few minutes also fine tuning only takes
seconds. The sluice box can run out either side making it faster and
easier to set up, plus you have a perfect view to watch the sluice box
load while feeding. We recommend the KT10SA sluice box adaptor which attaches
to our 10” wide sluice box (A52 or A52S) this makes a longer sluice box
with Miracle Matting, expanded metal,1/8th inch classifier and a long
rubber mat to smooth out the flow. The KT10DC runs off of two 12
Volt DC pumps and A 12 volt motor.
The
two RP2200 pumps provide the
water pressure for the DC motor to spin the drum. It can run roughly 6
hours
on a 12 volt battery making it ideal for maintaining a silent, low
profile
operation or when gas engines are not allowed. Use at the water's edge.
Mark's favorite is the Water driven motor KT10WD. The high-pressure
water
spins the water motor that drives a planetary gearbox that spins the
drum. The high pressure P90GH Provides enough water volume and pressure
to spin the water motor and provides more than ample water for the spray
bars and feed hopper. Works similar to a high banker away from the
water. The
KT10 feed hopper sets roughly 2.5 feet above ground making it
easier to shovel into and set buckets on the support for a easy
controlled feed. The Trommel is a pleasure to work with since the
tailings are kicked out 5 feet away keeping you dry.